Skip to main content

Tree Planting Guide

Tree Planting Resources

Tree Size & Planting Distance from Structures & Parking

Trees for use in the landscape are usually classified as small, medium and large. These trees should be planting at specific minimum distances from structures, such as houses and carports, as well as parking spaces. These are generally suggested distances to plant trees away from structures, but every tree is different. Contact Amy May  for guidance if you are considering planting a tree near your unit.

Picture1.jpg

Tree Species

Not all trees are suitable for planting in the Salt Lake Valley. We want to prioritize native and/or water-wise trees, as well as those that are tolerant to urban conditions (i.e. pollution, occasional flooding, drought, etc.). Ideally, we avoid trees that are invasive to this area, prone to disease and possess weak wood.

See Tree Utah’s list of suitable trees to start:  https://www.treeutah.org/tree-guide

What to avoid when planting trees

  • Do not plant trees near underground pipelines, septic tanks, walks or drives or under overhead wires. Check with your local utility companies for the location of buried utility lines
  • Do not plant a tree where it will overhang the house, in front of the front door or where it will obstruct a desirable view from inside the house.
  • Do not plant a large tree closer than 5 feet from a sidewalk; it will eventually push up the concrete.
  • Do not plant trees closer together than half their total spread at maturity.
  • Do not plant trees directly on property lines.
  • Do not plant trees that give dense shade where you want to grow grass

How to properly plant a tree

  • Using a shovel handle, measure the width and depth of the root ball of the tree you are planting.
  • Remove any grass/weeds in a circle that is 2-3 times the width of the root ball.
  • Dig the planting hole as a shallow bowl that is the width of the circle and the depth of the tree’s root ball.
  • Remove any tags from the trees branches and gently place it in the planting hole.
  • Gently take the tree out of the container or remove the wire basket and burlap, taking care to keep the root ball together.
  • Find the root flare of the tree (on obvious bulge where the tree transitions from stem to root) and make sure there is no soil above it. Some nursery grown trees will have as much as 3-4 inches of soil above the root flare.
  • Re-measure the planting hole to be sure that the root flare is at or just above the level of the ground.
  • Backfill around the tree until the planting hole is filled in. Pack down the soil as you fill in the
Back to top